Operation Manual

Telemetry

OFFSET

Touch

OFFSETOFFSET

OFFSET

OFFSETOFFSET

Touch

OFFSET

9-2. AILE >> FLAP

This mixing allows the entire trailing edge of the wing (aileron and ap) to operate as ailerons.

When active, as aileron is applied the aps also move so that the airplane rolls faster. In

FLAP MIX page, touch “INH” icon in ACT line to switch to “ON” then AILE >>FLAP function is

activated. Touch “ON” in CTL line to call the “Select” message popup and move the switch or

stick or volume with your choice then that switch or stick or volume is designated as on/ off

key and then the key direction setup page appears. You may select ON or OFF by touching

icons. When the key is moved to the direction of ON, the function is operated. Touch “BACK”

icon to return to FLAP MIX page. Touch “>>” icon in “SET” and “AILE >> FLAP” cross line to

call “AILE >> FLAP” setup page. Touch and activate the values in blue and adjust them with

INC and DEC buttons. When the setup is completed, touch SERVO icon on the top right to

call SERVO page. You may check the setup value for “AILE >> FLAP”.