Operation Manual

Touch

Telemetry

Touch

7. Snap roll

It is used to select the switch and adjust the value of AILE, ELEV, RUDD channels for the

snap roll function. Four snap roll directions can be set for your convenience.

In function page, touch “Snap roll” icon to call the snap roll setup page. Touch “INH” icon

in ACT line to switch to ON. Touch and activate the value in AILE, ELEV and RUDD line to

adjust the values with “INC” and “DEC” buttons. Touch “NULL” icon in CTL line to call “Select”

message popup then move the switch with your choice then that switch is designated as on/

off switch and then the switch direction setup page appears. You may select ON or OFF by

touching icons. When the switch is moved to the direction of ON, the function is operated.

Touch “BACK” icon to return to Snap roll setup page and to FUNCTION page