Operation Manual

Touch

Telemetry

6. Prog.MIX

Prog.MIX function is used to mix the different channels for diverse purpose. We recommend

you to use the same “On” switch with the one of Q.LINK. You may set the different program

mix function for each Q.LINK condition.

8 MIXs are available. The mixing method introduced here is divided into 2 type, liner mixing

type and curve mixing type. 1~5 MIXs are liner mixing type and 6~8 MIX is curve mixing type.

6-1. Liner mixing type

In FUNCTION page, touch “Prog.MIX” icon to call the prog.mix page. Touch “INH” icon in ACT

line to switch to “ON” and touch “NONE” in MST line to call the mixing channel setup page.

Touch and activate “NONE” icon and select the desired channel for the master by touching.

Now, touch and activate the left “NONE” icon, it is for Slave channel, and select the desired

channel for the slave by touching. Touch “BACK” icon to return to Prog.MIX setup page. Touch

>> icon in SET line to call the program mixing setup page. Now, you need to set CTL function.

- CTL setup with a switch

Touch “NULL” icon in CTL line to call “Select” message popup then move the switch with your

choice then that switch is designated as on/ off switch and then the switch direction setup

page appears. You may select ON or OFF by touching icons. When the switch is moved to

the direction of ON, the function is operated. Touch “BACK” icon to return to Prog.MIX setup

page.

- CTL setup with a stick

Touch “SW6” icon in CTL line to call “Select” message popup then move the stick with your

choice then that stick is designated as on/ off stick and then the stick direction setup page

appears. Move the stick to the position that you can comfortably reach, when the stick reach

this position, Prog.MIX function is off.