Operation Manual

Touch

14-4. RF STATUS VIEW

It shows RF status between transmitter and receiver throughout telemetry function

Touch “>>” icon in RF STATUS VIEW line then the indication to show the RF connection

status is displayed by graph.

14-5. VOCIE TRIGGER

It is used to program the sensors related with voice function. REPEAT, TRIG, VARIO, TRANS-

SMITTER, RECEIVER are available by default and the optional sensors could be attached. If

the optional sensor is connected, it is need to add the optional sensor at SENSOR SELECT

mode then new category in VOICE TRIGGER is created. The useable sensors are GENERAL

MODULE, ELECTRIC AIR MODULE, VARIO MODULE, GPS, AIR ESC

Touch “>>” icon in VOICE TRIGGER line to call “VOICE TRIGGER” setup page.

- REPEAT

You may set the time and select the switch. If the switch is on, one of voice functions is

repeated for the setup time.

Touch the value, “01s”, in blue and adjust the repeat time with INC and DEC buttons. Touch

“NULL” icon to call the “Select” message popup. Move the switch or volume with your choice

then that switch or volume is designated as on/ off key and then the key direction setup

page appears. You may select ON or OFF by touching icons. When the key is moved to the

direction of ON, the function is operated. Touch “BACK” icon to return to “VOICE TRIGGER”

setup page.