Operation Manual

Touch
Touch
Touch
YES YES
MODEL
CHANGE
MODEL
CHANGE
NO NO
Touch
6
1. Model select
It is used to add or select model.
Touch Model Sel icon in base menu to access Model sel menu
1-1. SET
Touch the desired MODEL NAME icon then it is activated in blue. Touch SET icon, Pop up
message “Please Wait !!” appears. About 1 sec later, the desired MODEL NAME is selected
and MODEL NAME at top is also changed.
1-2. NEW
This function is use to create the new model or exchange the current model to others. There
is 2 methods of Manual setting and Wizard setting. You may program the basic function
sequentially in Manual setting. Here is the example for airplane
Touch the desired MODEL NAME icon and touch NEW icon on the right then the pop up
message
“ Select” appears. Touch MAN to start Manual setting. The rst function of Manual setting is
MODEL NAME. Tap model name in blank of New Model Name using keypad on the right.
Touch EN icon on the right bottom and touch MAN icon on the left top then the model is
named and stored and then the next function, model type, is accessed.
• Alphabet keyboard explanation.
- CL(Clear):it is used to erase every letter you typed at a time.
- SP(SPACE):it is used to make a space between words
- DE(DELETE):it is used to erase a letter you typed
- EN(ENTER):it is used to save every letter you typed.
- CAPS:it is used for capital letters or small letters
- NUM:it is used for numbers.
- SPECIAL:it is used for special character.
BASE MENU (Helicopter, Airplane, Gilder)