Operation Manual

Touch

•

REVERSE

It is used to reverse the operation of an individual servo. Touch “SET” icon to activate “OFF”

in red and touch INC and DEC buttons to switch to “ON”. Touch “SET” icon again to deactivate

the value and touch INC buttons to move the cursor to “CENTER”.

•

CENTER

It is used to set the “center position” of servo.

Touch “SET” icon to activate the value in red. Move and hold the throttle stick to the desired

position for the servo center and touch “SET” icon then that position is assigned to the servo

center and the relevant value is displayed. Touch INC button to move the cursor to “Reverse”