Operation Manual

Touch

Telemetry

12. Trainer (Helicopter, Airplane, Gilder)

mz-12 features a programmable trainer function. Two transmitters must be connected by

Wireless or an optional DSC code. This function makes it possible for the instructor to choose

which functions and channels are to be used for instruction.

In FUNCTION page, touch “Trainer” icon to call the trainer setup page. The default value,

TEACH, is set in all channels which means that this transmitter is Teacher transmitter. If

touching TEACH icon, it is switched to PUPIL.

Assigned the desired channel to Pupil transmitter by touching “TEACH” icon to switch to PU-

PIL and touch “NULL” icon in CTL line to call “Select” message popup. Move the switch with

your choice then that switch is designated as on/ off switch, but we recommend to use S8 as

the trainer switch. When the switch direction setup page appears, you may select ON or OFF

by touching icons. When the switch is moved to the direction of ON, the function is operated.

Now, you need to bind teacher transmitter and pupil transmitter. Turn on pupil’s transmitter

and receiver and touch “OFF” icon in BIND line to switch to ON then this transmitter is bound

to pupil transmitter. Pupil transmitter can control the channels only if the trainer switch is on.

You may select trainer type by touch the value in TYPE line.

- RF : Teacher and pupil transmitters are connected by wireless

- DSC T & S : When teacher and pupil transmitters are connected by optional DSC code,

teacher transmitter should be set to DSC T and pupil transmitter should be set

to DSC S