Operation Manual

Touch

TRIM TRIM

TRIM

Touch

+076%

TRIM

If you touch OFF icon in Curve line, it is changed to ON and the operation curve is smoother.

To set the pitch, throttle curve trim, touch “TRIM” icon in the top right to call the pitch, throttle

curve trim setup page.

You may designate throttle curve key with DV1, DV2, DV3, DV4, SL1 and SL2 to set the

section curve for the hovering in normal Q.Link and IDLE 1, IDEL 2 Q.Link.

Touch “NONE” icon in CTL line to call “Select” message popup then move the switch that you

want to use then that switch is designated to the pitch, throttle curve trim switch. After CTL

setup, touch and activate “NONE” icon in MIXER line to select the pitch curve or the throttle

curve. Touch and activate “L” icon in POINT line to select the point number with INC and

DEC buttons. Now, if you move the designated switch, the selected point follows the switch’s

movement. After POINT setup, touch and activate the value, “1”, in Q.LINK line to set Q.LINK

number then the pitch, throttle curve trim is activated within the setup Q.LINK. Touch “BACK”

icon to return to FUNCTION page.