Operation Manual

Touch

Hold

ldle-up1

ldle-up2

ldle-up3

Touch

TRIM

TRIM TRIM

Touch

TRIM

Telemetry

3. PIT.CRV

This function adjusts the pitch operation curve in relation to the movement of the throttle stick

for each condition Since pitch curve is closely related with Q.LINK setup, Q.LINK setup should

precede PIT.CRV setup. Call Q.LINK setup page and check Q.LINK setup is completed

correctly and touch “BACK” icon to return FUNCTION page. (Refer to the manual on Q.LINK

setup)

In FUNCTIOPN page, touch “PIT.CRV” icon to call PIT.CRV setup page. You need to mark

the point on graph rst and then adjust the operation curve with “DEC”, “INC”, X-axis and

Y-axis buttons. Touch “ST OFF” to change to “ST ON” then the throttle position line appears

on graph. Move throttle stick and place the line at the desired position between point “L” and

“H” then touch “ENT” icon on the bottom right. Now the new point is marked in graph. You

can mark ve points between point “L” and “H” in the same way. Touch ST ON” to change to

“ST OFF” and complete the point setup. Now touch “DEC” or “INC” button to select point and

touch X-axis or Y-axis to activate and then touch DEC” or “INC” button to adjust the operation

curve. Turn on the preset Q.LINK switch then you may adjust the operation curve of every

Q.LINK as well.