Operation Manual

Touch

12. CH Set

It is used to set the channel of a transmitter. The basic setup of the transmitter’s channel is

set differently depending on 3 different types (“model type”, “wing type”, and “swash type”)

and mz-12 offers AUX channel to set the switch, volume, and side lever for your purpose.

Touch “CH set” icon on base menu page to call to “CH set” setup page. In “Ch Set” setup

page, the basic functions of the transmitter which is connected individually to every channel

are displayed. AUX channels are displayed as NONE when they are not connected to a servo.

To connect AUX channel to a servo, touch “NONE” icon to call the “select” message popup

and move the switch, volume or side lever with your choice then the selected switch, volume

or side lever is set to AUX channel and the connected servo is controlled. Touch “SERVO”

icon on the right to call the “SERVO VIEW” page, you may check the operating status of servo

connected AUX channel in this page. Touch “BACK” icon to return the previous page.