Operation Manual

Touch

After RESET SW is set, you may set “LAP SW” function. Touch “NULL” icon in “LAP SW” to

call “select” message popup. Now, move the switch with your choice then this switch is set

on/ off switch for “LAP SW” and the switch direction setup page appears. You may change

ON/OFF by touching icons. When the switch is moved to the direction of ON, the function is

operated. Whenever the LAP SWITCH is on, Lap time is saved into LAP list. Touch “BACK”

icon on the left top to call Timer setup page. In order for you to check the LAP list, Touch “>>”

icon in LAP List to call LAP list page. Up to 100 ea of Lap time can be saved and only 20ea is

displayed in the page. For the next LAP list, touch “NEXT” icon. If touching “CLR” icon on the

right top, LAP list is deleted. Touch “BACK” icon to call Timer setup page.

Touch “NEXT” icon on the right in Timer 1 setup page, you may call Timer 2 setup page.

You are able to set Timer 2 as the same as explained above. Timer 2 don’t have the function

of the ight data saving so it can calculate the time only.