User manual

Note:

By using the receiver-side channel assign-

ment function called channel mapping which

is integrated in the "Telemetry" menu of the

mz-18 HoTT and mz-24 HoTT transmitters, the

maximum 9 or 12 control channels of these transmitters

can be distributed as desired within one receiver as well

as to several receivers. In addition, several receiver

outputs can be assigned the same control function, for

example to control each aileron with two servos instead

of just one, etc. For the sake of clarity, it is strongly

recommended that only one of the two options be used.

Common function menus 

Basic menu - Output swap

S1006_mz-24.3.en.indd 97 17.12.2014 15:21:51