Manualshelf

User manual

ManualsBrandsGRAUPNER ManualsModel Making Remote ControlsMZ-18 HoTT Handheld RC 2,4 GHz No. of channels: 9 Incl. receiver
919293949596979899100
Control assignment
With a finger or the provided stylus, touch the value field
in the line of the desired control channel, for example:
BACK
Graubele
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
ST 1
ST 2
ST 3
ST 4
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
SERVO
Throttle
Aileron 1
Elevator
Rudder
Aileron 2
Aux 1
Aux 2
Aux 3
Aux 4
Aux 5
Aux 6
Aux 7
T:CO
Touch
The "SELECT" display appears:
BACK
Graubele
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
ST 1
ST 2
ST 3
ST 4
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
SERVO
Throttle
Aileron 1
Elevator
Rudder
Aileron 2
Aux 1
Aux 2
Aux 3
Aux 4
Aux 5
Aux 6
Aux 7
T:CO
Select
CLR
NO
Touch NO to terminate the process. To assign the
desired control or switch, activate it. Remember that
the proportional dials and rotary controls are only
recognized after a pause and therefore need to be
activated for slightly longer. If the travel is no longer
sufficient, activate the control in the opposite direction if
necessary. With an assigned 2-position switch, you can
only switch back-and-forth between the end values such
as motor ON and OFF. The 3-position switch offers a
middle position.
The display shows either the control name or the switch
number, such as:
BACK
Graubele
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
ST 1
ST 2
ST 3
ST 4
NONE
SL 1
NONE
NONE
NONE
NONE
NONE
NONE
SERVO
Throttle
Aileron 1
Elevator
Rudder
Aileron 2
Aux 1
Aux 2
Aux 3
Aux 4
Aux 5
Aux 6
Aux 7
T:CO
Deleting controls or switches
Touch the value field of the assignment to be deleted
with a finger or the provided stylus, for example:
BACK
Graubele
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
ST 1
ST 2
ST 3
ST 4
NONE
SL 1
NONE
NONE
NONE
NONE
NONE
NONE
SERVO
Throttle
Aileron 1
Elevator
Rudder
Aileron 2
Aux 1
Aux 2
Aux 3
Aux 4
Aux 5
Aux 6
Aux 7
T:CO
Touch
The "SELECT" display reappears:
BACK
Graubele
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
ST 1
ST 2
ST 3
ST 4
NONE
SL 1
NONE
NONE
NONE
NONE
NONE
NONE
SERVO
Throttle
Aileron 1
Elevator
Rudder
Aileron 2
Aux 1
Aux 2
Aux 3
Aux 4
Aux 5
Aux 6
Aux 7
T:CO
Select
CLR
NO
To delete the assigned control or switch, touch CLR :
BACK
Graubele
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
ST 1
ST 2
ST 3
ST 4
NONE
SL 1
NONE
NONE
NONE
NONE
NONE
NONE
SERVO
Throttle
Aileron 1
Elevator
Rudder
Aileron 2
Aux 1
Aux 2
Aux 3
Aux 4
Aux 5
Aux 6
Aux 7
T:CO
Select
CLR
NO
Touch
BACK
Graubele
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
ST 1
ST 2
ST 3
ST 4
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
SERVO
Throttle
Aileron 1
Elevator
Rudder
Aileron 2
Aux 1
Aux 2
Aux 3
Aux 4
Aux 5
Aux 6
Aux 7
T:CO
Important instructions:
•
The controllers assigned in this menu
globally affect all Quick Links. Only the
offset to be adjusted in the "D/R,EXP"
submenu of the function menu and the "travel
adjustment" also made in the "D/R,EXP" submenu,
see page 136 and 171, affect specific phases.
•
If, with a model that has flaps, you assign
to input 6 a control or switch identified as
"FLAP1", its function is dependent on the
current setting in the line "ACT" of the submenu
"Flap Sett" of the function menu, page 156. If the
value field to the right of "ACT" is INH or OFF ,
then this control or switch acts exclusively on servo 6
and possibly 7 with the values set in the submenu
"D/R,EXP". Otherwise, this control or switch
assumes the function of Q.Link trim with the value
set in the submenu "Flap Sett".
93
Basic menu - Channel Set
S1006_mz-24.3.en.indd 93 17.12.2014 15:21:49