User manual

Note:
The numbering of the trim controls T1 … T4
refers exclusively to the assignment of control
channels 1 … 4. Whether a specific name
relates to a trim control of the left and right control stick
depends on the selected stick mode, see page 200.
"POS." line (trim position)
The current trim positions are shown in the "POS"
column. (The trim range is about ±30 % of the entire
control path.) These current trim positions can appear
as follows for example:
BACK
NORMAL
Graubele
S
T1
STEP
POS.
SET
Digital Trim 1
T4
INC
RES
DEC
04
00%
000%
04
–07%
NONE
NONE
04
02
T2 T3
+13%
–06%
000%
000%
000%
Digital Trim 2
SET
VIEW
"SET" line (saving trim positions)
This option allows you to optionally save the current
position of the four digital trims so that they can be
returned to the visual middle position. After a model
memory is changed or after long periods between
flights, the last safe trim positions are available in the
middle positions of the respective trim display of the
control functions 1 … 4.
As an example, you have landed your model and
trimmed it. The current trim positions displayed white
in the "POS." line approximately in the middle of the
display. (The trim range is approximately ±30 % of the
overall control path.) The value fields in the "SET" line
underneath the display the saved trim and, since no
values have yet been saved, the value fields all contain
000%. The display therefore appears e.g. as above in
the section "POS." line.
The trim values are saved taking into account your
"common" or "single" setting in the header of the
submenu "Channel set" of the base menu, page 92,
once you have defined the Quick Links in the "Q.Link"
submenu, page 132 and 168. The active Quick Link is
shown green at the top edge of the display.
To save a trim value, use a finger or the provided
stylus to touch the value field below the trim value to
be transferred, such as the value field in column "T3"
(elevator):
BACK
NORMAL
Graubele
S
T1
STEP
POS.
SET
Digital Trim 1
T4
INC
RES
DEC
04
00%
000%
04
–07%
NONE
NONE
04
02
T2 T3
+13%
–06%
000%
000%
000%
Digital Trim 2
SET
VIEW
Touch
The color of the field switches from red to blue:
BACK
NORMAL
Graubele
S
T1
STEP
POS.
SET
Digital Trim 1
T4
INC
RES
DEC
04
00%
000%
04
–07%
NONE
NONE
04
02
T2 T3
+13%
–06%
000%
000%
000%
Digital Trim 2
SET
VIEW
Touch the SET button at the bottom right of the display
…
BACK
NORMAL
Graubele
S
T1
STEP
POS.
SET
Digital Trim 1
T4
INC
RES
DEC
04
00%
000%
04
–07%
NONE
NONE
04
02
T2 T3
+13%
–06%
000%
000%
000%
Digital Trim 2
SET
VIEW
Touch
… to transfer the trim value from the "POS." line into the
trim memory:
BACK
NORMAL
Graubele
S
T1
STEP
POS.
SET
Digital Trim 1
T4
INC
RES
DEC
04
00%
000%
04
–07%
NONE
NONE
04
02
T2 T3
+13%
00%
000%
–006%
000%
Digital Trim 2
SET
VIEW
Use the same procedure for other trim values.
Deleting saved trim positions
With a finger or the provided stylus, touch the value field
with the trim value you want to delete, for example:
BACK
NORMAL
Graubele
S
T1
STEP
POS.
SET
Digital Trim 1
T4
INC
RES
DEC
04
00%
000%
04
–07%
NONE
NONE
04
02
T2 T3
+13%
00%
000%
–006%
000%
Digital Trim 2
SET
VIEW
Touch the RES button to reset a changed value in the
blue (and hence active) field to the default.
Use the same procedure with the other trim controls.
87
Basic menu - Trim setting
S1006_mz-24.3.en.indd 87 17.12.2014 15:21:47