User manual

BACK
Graubele
CH
CH 1.
CH 2.
CH 3.
CH 4.
Delay
STO1
STO2
SET
F/S
HOLD
HOLD
F/S
0.25s
MODE
SET
NEXT
-111%
000%
Use same procedure to save additional fail safe
positions.
Finally, in the bottom line "Delay", repeatedly touch the
value fi eld to choose the desired delay from among the
four delays (0.25 s, 0.5 s, 0.75 s and 1 s), for example:
BACK
Graubele
CH
CH 1.
CH 2.
CH 3.
CH 4.
Delay
STO1
STO2
SET
F/S
HOLD
HOLD
F/S
0.5s
MODE
SET
NEXT
-111%
+012%
Once all the fail safe positions and appropriate
delays are specifi ed, transmit these values to
the desired receiver.
Transmitting the selected fail safe positions to the
receiver
Now at the latest, switch on your receiver so that you
can transfer the selected fail safe positions to the
receiver by touching the STO1 button with a fi nger or
the provided stylus, for example:
BACK
Graubele
CH
CH 1.
CH 2.
CH 3.
CH 4.
Delay
STO1
STO2
SET
F/S
HOLD
HOLD
F/S
0.5s
MODE
SET
NEXT
-111%
+012%
Touch
Transmitting the selected delays to the receiver
The delays selected as described are transferred to the
operable receiver(s) by touching the STO2 button, for
example:
BACK
Graubele
CH
CH 1.
CH 2.
CH 3.
CH 4.
Delay
STO1
STO2
SET
F/S
HOLD
HOLD
F/S
0.5s
MODE
SET
NEXT
-111%
+012%
Touch
NOTE:
•
Note that the chosen fail safe settings
are saved in the receiver. The fail safe
settings should be restored after
changing a receiver and should be deleted in the
previous receiver by resetting, for example, as
described on page 33.
• Use this safety option to program a fail safe for
at least the motor throttle position in gas models
while idling, or to program the motor function
to stop with electric models, or to hold with
helicopter models. This makes it more diffi cult
for the model to operate independently in case
of malfunctions and cause property damage and
injury. If necessary, ask for assistance from an
experienced pilot.
Touch the BACK button at the top left of the display to
leave this menu and return to the base menu.
BACK
Graubele
CH
CH 1.
CH 2.
CH 3.
CH 4.
Delay
STO1
STO2
SET
F/S
HOLD
HOLD
F/S
0.5s
MODE
SET
NEXT
-111%
+012%
Touch
BACK
SYSTEM
BASE
FUNCTION
Model Sel
E.P.A
Model Type
Rev/Slow
Sub-Trim
Motor
Timer
TX ctl
Fail Safe
Trim Step
Servo
Out.Swap
CH Set
85
Basic menu - Fail safe
S1006_mz-24.3.en.indd 85 17.12.2014 15:21:46