User manual
Note:
As of fi rmware version V 1.023, the date and
time can also be updated with the aid of
"Firmware_Upgrade_grStudio V4.x".
"BATT TIME" and "MODEL TIME" lines
To monitor the transmitter battery, use the operating
time meter to record the overall total operating time
of the transmitter from the last recognized increase in
transmitter supply voltage. A switch cannot be assigned.
The timer is automatically reset to "0.00h" when the
voltage of the transmitter battery is noticeably higher
than before after restarting the transmitter, for example
from charging or exchanging the battery with a charged
battery.
The model time timer in contrast shows the currently
recorded overall access time to the active model
memory.
Both timers cannot be switched, but they can be
manually reset to zero if desired by touching the RES
button:
BACK
Graubele
TIME
BATT TIME
DATE
55
2014
MODEL TIME
09
15
22
DEC
M.RES
INC
NEXT
/
:
B.RES
15
:
/
SET
:
:
:
:
02 07 34
0 12 34
Touch
BACK
Graubele
TIME
BATT TIME
DATE
55
2014
MODEL TIME
09
15
22
DEC
M.RES
INC
NEXT
/
:
B.RES
15
:
/
SET
:
:
:
:
02 07 34
0 00 00
After you have fi nished making your settings, touch
the BACK button at the top left of the display to leave
the "Timer" menu and return to the base menu.
BACK
SYSTEM
BASE
FUNCTION
Model Sel
E.P.A
Model Type
Rev/Slow
Sub-Trim
Motor
Timer
TX ctl
Fail Safe
Trim Step
Servo
Out.Swap
CH Set
83
Basic menu - Timers
S1006_mz-24.3.en.indd 83 17.12.2014 15:21:45