User manual

NOTE:
Never start a range test on the transmitter
during normal model operation!
DSC OUTPUT
To set the modulation of your transmitter at the DNC
output, touch the button with the current setting in the
"DSC Output" line (repeatedly if necessary) until the
desired modulation appears. Four types of modulation
are available in this sequence: "PPM10", "PPM16",
"PPM18" and "PPM24":
BACK
Graubele
TX OUT SET
RF ON/OFF
RANGE TEST
BIND ON/OFF
SET
ON
OFF
12CH
RX1
RX2
DSC OUTPUT
SET
OFF
PPM10
NORMAL
RF TYPE
99sek
Touch
BACK
Graubele
TX OUT SET
RF ON/OFF
RANGE TEST
BIND ON/OFF
SET
ON
OFF
12CH
RX1
RX2
DSC OUTPUT
SET
OFF
PPM18
NORMAL
RF TYPE
99sek
The selected modulation primarily influences the
number of available control channels at this DSC socket
and hence also influences a flight simulator, trainer
system or external RF module connected to this socket.
If "PPM10" is selected, the channels are 1 … 5; with
"PPM16", the channels are 1 … 8, with "PPM18", the
channels are 1 … 9, and with "PPM24", the control
channels are 1 … 12.
Touch the BACK button at the top left of the display to
leave this menu and return to the base menu.
BACK
Graubele
TX OUT SET
RF ON/OFF
RANGE TEST
BIND ON/OFF
SET
ON
OFF
12CH
RX1
RX2
DSC OUTPUT
SET
OFF
PPM18
NORMAL
RF TYPE
99sek
Touch
78
Basic menu - Transmitter setting
S1006_mz-24.3.en.indd 78 17.12.2014 15:21:43