User manual

1S
3SERVO 140
3S 120(Nick)
2S
3S-R
4SERVO 90
3S
3S-N
4S
1SERVO NOR
2SERVO 180
3S 120(Roll)
… etc. For the remainder of the process, you only need
to use the assistant as described in the mentioned
section until all the basic settings of the newly selected
model type are entered.
Basically, use the same procedure as you would, for
example, to change the wing type of the current model
from "2AILE" to "2AILE 2FLAP'. In this case, use a
finger or the provided stylus to touch the value field "W/
Type" …
ACRO
2AILE
ELEC
AIRPLANE
T/TYPE
ELE.POWER
M/TYPE W/TYPE P/TYPE
NORMAL
Normal
ENT
Touch
… and change the wing type in the display "W/Type"
that appears …
1A
2AILE2FLAP
2AILE4FLAP
4AILE4FLAP
1A1F
2A
2A1F
4AILE2FLAP
2A2F
2A4F
4A2F
4A4F
1AILE
1AILE1FLAP
2AILE1FLAP
2AILE
Wing Type
NORMAL
… by touching the new wing type with a finger or the
provided stylus. Use the same procedure for all of the
selectable fields.
Note:
In contrast to the display of the 12-channel
mz-24 HoTT transmitter, only "1A" to a max.
"2A2F" are offered in the display of the
9-channel mz-18 HoTT transmitter.
65
Basic menu - Model type
S1006_mz-24.3.en.indd 65 17.12.2014 15:21:37