User manual

WIZ.
NORMAL
ENT
TRIM
000%
000%
000%
2
IN
OUT
POINT
OFF
INC
DEC
Y-axis
X-axis
ST ON
Curve
Pit.CRV
Pitch min.
FORWARD
Touch
WIZ.
NORMAL
ENT
TRIM
000%
000%
000%
?
IN
OUT
POINT
OFF
INC
DEC
Y-axis
X-axis
ST ON
Curve
Pit.CRV
Pitch min.
FORWARD
Changing the support point value
• X-axis button (X-axis)
Activate this function by touching the button at
the bottom edge of the display with a finger or the
provided stylus.
You can then move an active (red) point to the
right by pressing the INC button, or to the left by
pressing the DEC button, for example:
NORMAL
ENT
TRIM
000%
000%
000%
2
IN
OUT
POINT
OFF
INC
DEC
Y-axis
X-axis
ST ON
Curve
WIZ.
Pit.CRV
Pitch min.
FORWARD
Touch the X-axis button again to deactivate the
function.
Note:
•
If you move the red point horizontally
away from the current control
position, the point soon becomes
green and a "?" appears in the POINT line.
This question mark does not relate to the point
which has been moved but rather indicates
that another point can be set at the current
control position.
• Remember that the percentages in the "IN"
and "OUT" line always refer to the momentary
position of the control stick and not to the
position of the point.
• Y-axis button (Y-axis)
Activate this function by touching the button at
the bottom edge of the display with a finger or the
provided stylus.
You can then move an active (red) point upward
by pressing the INC button, or downward by
pressing the DEC button, for example:
NORMAL
ENT
TRIM
2
–044%
+027%
+044%
IN
OUT
POINT
OFF
INC
DEC
Y-axis
X-axis
ST ON
Curve
WIZ.
Pit.CRV
Pitch min.
FORWARD
Touch the Y-axis button again to deactivate the
function.
Note:
Remember that the percentages in the
"IN" and "OUT" line always refer to the
momentary position of the control stick
and not to the position of the point.
Rounding off the channel 1 curve
• ON/OFF button in the "Curve" line
The default angled curve profile can be
automatically rounded off by turning on the
rounding function by pressing this button with a
finger or the provided stylus, for example:
NORMAL
ENT
TRIM
2
–044%
+027%
+044%
IN
OUT
POINT
OFF
INC
DEC
Y-axis
X-axis
ST ON
Curve
WIZ.
Pit.CRV
Pitch min.
FORWARD
Touch
NORMAL
ENT
TRIM
2
–044%
+027%
+044%
IN
OUT
POINT
ON
INC
DEC
Y-axis
X-axis
ST ON
Curve
WIZ. Pit.CRV
Pitch min.
FORWARD
Important note:
The curves portrayed here are for
demonstration purposes only and do not
represent real pitch curves.
Additional functions
• TRIM button
The mz-18 HoTT and mz-24 HoTT transmitters
have a function that is integrated in the transmitter
program for trim up to six support points of the
two options "throttle curve" and "pitch curve"
during flight.
Open the following window by touching the TRIM
button at the top right edge of the display with a
54
Basic menu - Model selection
S1006_mz-24.3.en.indd 54 17.12.2014 15:21:31