User manual

ManualsBrandsGRAUPNER ManualsModel Making Remote ControlsMZ-18 HoTT Handheld RC 2,4 GHz No. of channels: 9 Incl. receiver

• "E.P.A" (servo travel/limit)

WIZ.

CH 1.

CH 2.

CH 3.

CH 4.

CH 5.

150%

INC

RES

DEC

100%

150%

100%

E.P.A

– Limit Limit +

– Travel +

Note:

In order to reach control channels with

numbers higher than CH5, touch NEXT

[next page] at the top right of the display.

The travel and limitation are shown separately for

each side in this display. The setting range in both

cases is 0 … 150% of the normal travel.

The set values always refer to the settings in the

submenu "Sub-Trim".

To change a current value, touch the desired option

ﬁeld with a ﬁnger or the provided stylus, for example:

WIZ.

CH 1.

CH 2.

CH 3.

CH 4.

CH 5.

150%

INC

RES

DEC

100%

150%

100%

E.P.A

– Limit Limit +

– Travel +

Touch

The color of the option ﬁeld switches from red to

blue:

WIZ.

CH 1.

CH 2.

CH 3.

CH 4.

CH 5.

150%

INC

RES

DEC

100%

150%

100%

E.P.A

– Limit Limit +

– Travel +

Touch the INC button at the right edge of the

display to gradually increase the value of the active

option ﬁeld. Touch the DEC button underneath to

reduce the current value of the active option ﬁeld,

and touch the RES button to reset the changed

value back to the default.

Once all you have adjusted all of your servos, touch

the WIZ. button at the top left to switch to the next

adjustment phase:

WIZ.

CH 1.

CH 2.

CH 3.

CH 4.

CH 5.

150%

INC

RES

DEC

100%

123%

100%

150%

100%

E.P.A

– Limit Limit +

– Travel +

Touch

• "D/R,EXP"

1. Display "D/R,EXP"

The classic dual rate/expo function of this menu

item allows you to switch or inﬂuence the control

deﬂections and characteristics of rolling, elevation

and tail rotor, i.e. control functions 2 … 4,

independent of the Quick Link using a switch if

desired.

In order to switch between the individual control

functions, touch the button on the right next to the

yellow "CH":

WIZ.

D/R

EXP

CTL

AILE

+100%

NULL

INC

RES

DEC

NORMAL

000%

SYM

OFF

D/R EXP

Touch

Note:

•

In the graphic of the display, the

curve characteristics are shown

directly.

• If you have created Quick Links in the

submenu "Q.Link" page 168, and have

assigned an appropriate name, it appears at

the top right such as "NORMAL". Activate the

corresponding switches if desired to switch

between Quick Links.

• By default, the dual rate and/or expo values

for the selected control function are set

for each control side. After switching the

option "SYM" added to the bottom line as of

ﬁrmware version 1020 from OFF to ON , a

simultaneous (symmetrical) setting of both

control sides is possible.

Analogous to the previously described displays,

touch the corresponding option ﬁeld with a ﬁnger

or the provided stylus to change a current value,

and increase or decrease the value by touching

the INC and DEC buttons at the right side of

the display the appropriate number of times.

The adjustment range is ±125 % in the"D/R" line

and ±100 % in the "EXP" line.

Touch the RES button to reset a changed value

in a blue (active) value ﬁeld to the default value.

In addition, a switch or a control switch can be

assigned in the line "CTL" as described in section

"Control, switch and control switch assignment"

Basic menu - Model selection

S1006_mz-24.3.en.indd 51 17.12.2014 15:21:30