User manual

Model selection
Edit model memories 1 … 30
Switch on the transmitter, and then in the basic display
of the transmitter, touch the value fi eld M x on the
left in the display with a fi nger or the provided stylus to
directly display the submenu "Model Sel", or alternately
touch the gear icon labelled "B" to open the same menu
from the base menu:
000 000
000
000
mz
000%
000%
000
000
BATT TIME 00: 01: 23
MODEL NAME 1
M 1
0:01:23
NORMAL
000:00.0
000:00.0
4.2V
RX TX
RX 00.0V
Touch
BACK
SYSTEM
BASE
FUNCTION
Model Sel
E.P.A
Model Type
Rev/Slow
Sub-Trim
Motor
Timer
TX ctl
Fail Safe
Trim Step
Servo
Out.Swap
CH Set
Touch
BACK
NEXT
01
MODEL NAME 1
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
MODEL NAME 1
MODEL NAME 2
MODEL NAME 3
MODEL NAME 4
MODEL NAME 5
MODEL NAME 6
The following description of this extensive menu follows
the sequence of the function buttons at right edge of the
display starting with the top function Button:
NEXT (next page)
Touch the NEXT button in the display at the top right
with a fi nger or the provided stylus to switch from the
fi rst six model memories…
BACK
NEXT
01
MODEL NAME 1
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
MODEL NAME 1
MODEL NAME 2
MODEL NAME 3
MODEL NAME 4
MODEL NAME 5
MODEL NAME 6
Touch
… to a display of the next six…
BACK
NEXT
07
MODEL NAME 1
08
09
10
11
12
SEL
NEW
IMP.M
EXP.M
RES
CPY
MODEL NAME 7
MODEL NAME 8
MODEL NAME 9
MODEL NAME 10
MODEL NAME 11
MODEL NAME 12
… Etc. After model memories 25 … 30 are displayed,
model memories 01 … 06 reappear for selection, etc.
SEL (change model)
Touch the selection fi eld for the desired model memory
with a fi nger or the provided stylus, for example:
BACK
NEXT
01
MODEL NAME 1
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
MODEL NAME 1
MODEL NAME 2
MODEL NAME 3
MODEL NAME 4
MODEL NAME 5
MODEL NAME 6
Touch
The color of the fi eld switches from red to blue:
BACK
NEXT
01
MODEL NAME 1
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
MODEL NAME 1
MODEL NAME 2
MODEL NAME 3
MODEL NAME 4
MODEL NAME 5
MODEL NAME 6
Touch the SEL icon with a fi nger or the provided stylus
on the right edge of the display:
BACK
NEXT
01
MODEL NAME 1
02
03
04
05
06
SEL
NEW
IMP.M
EXP.M
RES
CPY
MODEL NAME 1
MODEL NAME 2
MODEL NAME 3
MODEL NAME 4
MODEL NAME 5
MODEL NAME 6
Touch
… and then touch NO to terminate the process or YES
to change the model …
44
Basic menu - Model selection
S1006_mz-24.3.en.indd 44 17.12.2014 15:21:27