User manual

mini-USB connector
Located under the rear cover of the mz-18 HoTT and
mz-24 HoTT transmitters, there is a connector socket
for software updates as well as the date and time setting
from a desktop or laptop with one of the Windows
operating systems (XP, Vista, 7 or 8):
The USB cable that comes with the set is plugged
into this socket. The procedure for obtaining software
updates through a computer is described in the software
package instructions.
The software that the computer needs as well as the
appropriate USB driver can be found on the download
page at www.graupner.de for the respective product.
After the required driver and software are installed,
the transmitter can be updated as needed using this
connector, or the date and time can be set.
27
Description of the transmitter - Connections on the back
S1006_mz-24.3.en.indd 27 17.12.2014 15:21:21