User manual

Graupner HoTT Vario module
Order No. 33700
Wide-ranging functions combined into one device make the
SMART BOX your future smart companion. Whether it comes to
displaying real-time telemetry data or making settings on your
HoTT system, 8 x 21 characters on a large display enable easy
use. An integrated buzzer that emits an acoustic signal and
warning tone and enhances the flexible use of the BOX even
further.
Using the accompanying installation set, the device can be
mounted on brackets of the transmitter and is thus optimally
positioned to enable the reading of real-time telemetry data
even while controlling your model.
The user-installed updates ensures that the SMART BOX
always has the latest software and can be safely expanded with
future functions.
• Transmitter voltage display
with adjustable warning
threshold
• Country setting
• Range test • Signal quality
• Receiver temperature • Receiver voltage
• Servo reversal • Servo neutral position
• Servo travel • Cycle time
• Channel switching • Fail-Safe settings
• Mixer settings • Servo test
Dimensions: approx. 76 mm x 72 mm x 17 mm (L x W x H)
Weight: approx. 55 g
Graupner HoTT RPM magnetic sensor
Order No. 33616
For connecting to the General Engine (order No. 33610),
General Air (order No. 33611) or Electric Air module (order
No. 33620).
Select the number of blades in the module's telemetry menu.
Graupner HoTT RPM optical sensor
Order no. 33615
For connecting to the General Engine (order No. 33610),
General Air (order No. 33611) or Electric Air module (order
No. 33620).
Select the number of blades in the module's telemetry menu.
Graupner HoTT USB interface
Order No. 7168.6
This USB interface is required together with the separately
available adapter cable (order No. 7168.6S) for updating
receivers and sensors, and the mz-18 HoTT and mz-24
HoTT transmitters can be updated directly with the USB cable
included in the delivery with the interface.
Graupner HoTT adapter cable
Order No. 7168.6S
This adapter cable is required together with the separately
available USB interface (order No. 7168.6), for updating
receivers and sensors. The mz-18 HoTT and mz-24 HoTT
transmitters can be updated directly with the USB cable
included in the delivery of the interface.
222
Appendix
S1006_mz-24.3.en.indd 222 17.12.2014 15:23:04