User manual

BACK
Graubele
1
ST MODE:
FRONT
RUDD
AILE
ELEV THRO
In order to switch to a control mode different from the
default, touch the red mode button with a fi nger or the
provided stylus until the number appears of the control
mode that you want, for example:
BACK
Graubele
3
ST MODE:
FRONT
AILE
RUDD
ELEV THRO
Touch the BACK button at top left to return to the
system menu:
BACK
SYSTEM
BASE
FUNCTION
ST mode
Etc. Set
Warning
Display
MP3
Stick Cali
To open the submenus of the SYSTEM menu, touch to
the gear symbol labelled "S" in the transmitter's basic
display at the bottom right.
000 000
000
000
mz
000%
000%
000
000
BATT TIME 00: 01: 23
Graubele
M 1
0:01:23
NORMAL
000:00.0
000:00.0
4.1V
RX TX
RX 00.0V
Touch
The display switches to the purple main menu. Touch
the menu item "ST mode" with your fi nger or the
provided stylus.
BACK
SYSTEM
BASE
FUNCTION
ST mode
Etc. Set
Warning
Display
MP3
Stick Cali
Touch
There are four different ways of assigning the four
control functions of aileron, elevator, rudder and throttle
or airbrake fl aps of a wing model …
“MODE 2” (Throttle at left stick)
“MODE 3” (Throttle at right stick) “MODE 4” (Throttle at left stick)
“MODE 1” (Throttle at right stick)
elev. down
elev. up
left rudder
right rudder
full throttle
idle
left aileron
right aileron
full throttle
left rudder
right rudder
idle
elev. down
elev. up
left aileron
right aileron
elev. down
elev. up
left aileron
right aileron
Motor Vollgas
idle
left rudder
right rudder
full throttle
idle
left aileron
right aileron
elev. down
elev. up
left rudder
right rudder
… or roll, elevation, tail rotor and throttle or pitch of a
helicopter …
“MODE 2” (Throttle at left stick)
“MODE 3” (Throttle at right stick)
“MODE 4” (Throttle at left stick)
“MODE 1” (Throttle at right stick)
pitch axis
tail rotor
pitch axis
tail rotor
throttle
roll
roll
throttle
tail rotor
tail rotor
throttle throttle
pitch axis
pitch axis
roll
roll
pitch axis
pitch axis
roll
roll
Motor/Pitch
throttle
tail rotor
tail rotor
throttle
throttle
roll
roll
pitch axis
pitch axis
tail rotor
tail rotor
… to the two control sticks. The options that are chosen
depend on the individual preferences of the model pilot.
"Mode 1" is the default.
This setting is independent of the model and
therefore equally applies to all model
memories:
Stick mode
Model-specifi c basic settings
200
System menu - ST mode
S1006_mz-24.3.en.indd 200 17.12.2014 15:22:49