User manual

NORMAL
Starlet
EXP
–012%
RES
A
000%
000%
000%
B
BACK
S
(RATE)
AILE >> ELEV
INC
DEC
Use the same procedure for the value on the oppo-
site side of the control travel, for example:
NORMAL
Starlet
EXP
–012%
RES
A
–021%
000%
000%
B
BACK
S
(RATE)
AILE >> ELEV
INC
DEC
Touch the RES button to reset a changed value in a
blue (active) value fi eld to the default value.
You can make any necessary settings in the two bot-
tom EXP value fi elds as in the related description in
the section "D/R,EXP", starting on page 171.
After making your settings, leave this display and go
to "Heli-Mix" selection by touching the BACK button
at the top left of the display.
NORMAL
Starlet
EXP
–012%
RES
A
–021%
+050%
+050%
B
BACK
S
(RATE)
AILE >> ELEV
INC
DEC
Touch
Important note:
The mixed value is portrayed here are for
demonstration purposes only and do not
represent real values.
BACK
NORMAL
Starlet
S
ACT
ELEV >> AILE
PITC >> AILE
PITC >> ELEV
AILE >> ELEV
INH
INH
INH
ON
>>
>>
>>
>>
ON
ON
ON
ON
SET CTL
MIX.TYPE
Select another mixer here if desired and adjust it as
described.
• "CTL" column (control/switch)
In this column assign as described in the section
"Control, switch and control switch assignment" on
page 38, a control to the respective mixer that you
can use to switch on and off the mixer, for example:
BACK
NORMAL
Starlet
S
ACT
ELEV >> AILE
PITC >> AILE
PITC >> ELEV
AILE >> ELEV
INH
INH
INH
ON
>>
>>
>>
>>
ON
ON
ON
SW5
SET CTL
MIX.TYPE
After making your settings, leave this menu and go to
"Menu selection" by touching the BACK button at the
top left of the display.
BACK
SYSTEM
BASE
FUNCTION
Q.Link
PIT.CRV
D/R,EXP
THR.CRV
Gyr/Gover
THR.HOLD
S.Limit
Swash
S.MIX
THR.MIX
Prog.MIX
PIT>>RUDD
Trainer
Telemetry
195
Helicopter model function menu - Helicopter mixer
S1006_mz-24.3.en.indd 195 17.12.2014 15:22:46