User manual

gyro gain can also be smoothly varied with a control in
the "Gyro" line in the "Channel set" menu, page 92.
"Governor ACT" line
Gyro Gain
000% Gyro Suppression
Governor RATE
Governor ACT
000%
INH
050%
RES
DEC
INC
NORMAL
Starlet
BACK
S
In the above fi gure, this option is normally INH , which
means that the control channel can be normally used
without restriction.
If you have or wish to connect a governor to output 8 to
automatically maintain the rotor speed, touch the value
fi eld of this line with a fi nger or the provided stylus to
switch it ON …
Gyro Gain
000% Gyro Suppression
Governor RATE
Governor ACT
000%
ON
050%
RES
DEC
INC
NORMAL
Starlet
BACK
S
… and vice versa.
"Governor RATE" line
After you have activated the option "Governor ACT" by
switching to ON in the previous line, you can set the
rotor speed to be maintained by your governor in this
line by changing the percentage.
The adjustment range is 0 to 100%.
Touch the value fi eld of this line with a fi nger or the
provided stylus:
Gyro Gain
000% Gyro Suppression
Governor RATE
Governor ACT
000%
ON
050%
RES
DEC
INC
NORMAL
Starlet
BACK
S
Touch
The color of the fi eld switches from red to blue:
Gyro Gain
000% Gyro Suppression
Governor RATE
Governor ACT
000%
ON
050%
RES
DEC
INC
NORMAL
Starlet
BACK
S
You can change the current value in the blue (active)
value fi eld by touching the INC or DEC buttons at the
right edge of the display, for example:
Gyro Gain
000% Gyro Suppression
Governor RATE
Governor ACT
000%
ON
067%
RES
DEC
INC
NORMAL
Starlet
BACK
S
Touch the RES button to reset a changed value in a
blue (active) value fi eld to the default value.
After making your settings, leave this menu and go to
"Menu selection" by touching the BACK button at the
top left of the display:
BACK
SYSTEM
BASE
FUNCTION
Q.Link
PIT.CRV
D/R,EXP
THR.CRV
Gyr/Gover
THR.HOLD
S.Limit
Swash
S.MIX
THR.MIX
Prog.MIX
PIT>>RUDD
Trainer
Telemetry
188
Helicopter model function menu - Gyro/Gover
S1006_mz-24.3.en.indd 188 17.12.2014 15:22:42