User manual

The pitch control stick is not necessarily in the bottom
position during autorotation. Typically, it is between
hovering position and the bottom stop so that the longi-
tudinal inclination can be corrected using the elevation
control.
You can shorten the approach by carefully pulling back
on the elevation control and sensitively reducing the
pitch, or extending the approach by pushing the eleva-
tion control forward and carefully increasing the pitch.
After making your settings, leave this menu and go to
"PIT.CRV" menu by touching the BACK button at the
top right of the display:
NORMAL
Starlet
ENT
TRIM
–036%
+027%
+027%
2
BACK
IN
OUT
POINT
ON
INC
DEC
Y-axis
X-axis
ST ON
CURVE
S
Pitch min.
FORWARD
Touch
… and go to the menu selection of the function menu:
BACK
SYSTEM
BASE
FUNCTION
Q.Link
PIT.CRV
D/R,EXP
THR.CRV
Gyr/Gover
THR.HOLD
S.Limit
Swash
S.MIX
THR.MIX
Prog.MIX
PIT>>RUDD
Trainer
Telemetry
180
Helicopter model function menu - PIT.CRV
S1006_mz-24.3.en.indd 180 17.12.2014 15:22:39