User manual

Q.Link
Setting up Quick Links
In the basic transmitter display, use a fi nger or the
provided stylus to touch the gear icon labelled "F":
000 000
000
000
mz
000%
000%
000
000
BATT TIME 00: 01: 23
Starlet
M 2
0:01:23
NORMAL
000:00.0
000:00.0
4.2V
RX TX
RX 00.0V
Touch
The display switches to the blue function menu. Touch
the menu item "Q.Link" with a fi nger or the provided
stylus:
BACK
SYSTEM
BASE
FUNCTION
Q.Link
PIT.CRV
D/R,EXP
THR.CRV
Gyr/Gover
THR.HOLD
S.Limit
Swash
S.MIX
THR.MIX
Prog.MIX
PIT>>RUDD
Trainer
Telemetry
Touch
Within a model memory, the mz-18 HoTT and mz-24
HoTT transmitters make it possible to program up to six
different settings for different fl ight states including the
autorotation phase, normally termed Quick Links, in the
corresponding menus.
Setting up Quick Links
Setting up Quick Links for helicopter models starts in
this menu item by assigning the individual links a name
and a time for smoothly switching to the respective link.
Even if the two fi rst Quick Links are already assigned,
the assignment sequence of links 1 to a maximum of 6
is irrelevant and can have gaps. Nevertheless, always
start with "Q.LINK1" as the "NORMAL" link which is
always active when …
• no Quick Link switch is set, or
• no Quick Link has been assigned to a specifi c switch
combination.
Assigning or leaving the Q.Link name "NORMAL" for
"Quick Link 1" could therefore be recommendable. The
names themselves do not have any technical relevance
to the program and only serve to visually identify the
Q.Link that has been switched on and are therefore
displayed in all Q.Link-dependent menus as well as the
transmitter's main display.
To set up the fi rst real Q.Link, touch the desired button
in the "Q.LINK" column such as "Idle-up1" with a fi nger
or the provided stylus:
BACK
1.
2.
3.
4.
5.
NORMAL
CPY
DEL
DEC
0.0s
NAM
Starlet
NEXT
NEW
INC
Hold
Idle-up1
Idle-up2
Idle-up3
Q.LINK
SLOW
CTRL
Touch
The button color changes from red to blue:
BACK
1.
2.
3.
4.
5.
NORMAL
CPY
DEL
DEC
0.0s
NAM
Starlet
NEXT
NEW
INC
Hold
Idle-up1
Idle-up2
Idle-up3
Q.LINK
SLOW
CTRL
Note:
In order to set "Quick Link 6", touch NEXT
[next page] at the top right of the display.
• NEW button
Activate the selected Quick Link by touching
the NEW button with a fi nger in the provided stylus:
BACK
1.
2.
3.
4.
5.
NORMAL
CPY
DEL
DEC
0.0s
NAM
Starlet
NEXT
NEW
INC
Hold
Idle-up1
Idle-up2
Idle-up3
Q.LINK
SLOW
CTRL
Touch
At the same time, additional value fi elds appear in
the "DELAY" and "CTRL" columns:
1.
2.
3.
4.
5.
NORMAL
DEL
0.0s
NAM
Starlet
0.0s
NULL
BACK
CPY
DEC
NEXT
NEW
INC
Hold
Idle-up1
Idle-up2
Idle-up3
Q.LINK
SLOW
CTRL
• NAM button (name)
You can describe or change to the existing Quick
Link name by touching the NAM [Name] button at
the right of the display with your fi nger or provided
stylus as described in detail in the section "Model
name", starting on page 45, such as to the name
"HOVER":
168
Helicopter model function menu - Q.Link
S1006_mz-24.3.en.indd 168 17.12.2014 15:22:32