User manual

V-Tail
Adjusting the actuation of a V-tail
Note:
This menu only appears when a V-Tail has
been selected in the basic settings of the
"Model Sel" or "Model type" menu.
In the basic transmitter display, use a fi nger or the
provided stylus to touch the gear icon labelled "F":
000 000
000
000
mz
000%
000%
000
000
BATT TIME 00: 01: 23
Graubele
M 1
0:01:23
NORMAL
000:00.0
000:00.0
4.1V
RX TX
RX 00.0V
Touch
The display switches to the blue function menu. Use a
fi nger or the provided stylus to touch the "V-Tail" menu
item:
BACK
SYSTEM
BASE
FUNCTION
Q.Link
Wing MIX
D/R,EXP
THR.CRV
Flap MIX
Aile diff
Flap sett
Prog.MIX
V-Tail
Trainer
Telemetry
Butterfly
Touch
The elevator and rudder are controlled by two separate-
ly-actuated rudders arranged in a V-shape. The coupling
function for the rudder and elevator control is automati-
cally transferred from the program.
Flight-phase-dependent settings
If you have created Quick Links in the submenu
"Q.Link", page 132, and have assigned an appropriate
name, it appears at the top right in green font such
as "NORMAL". Activate the corresponding switches if
desired to switch between Quick Links:
RUDD
INC
RES
DEC
ELEV
BACK
NORMAL
Graubele
S
A
+100%
+100%
+100%
+100%
BA
B
Programming
Touch the corresponding value fi eld with the value to
be changed using a fi nger or the provided stylus, for
example:
RUDD
INC
RES
DEC
ELEV
BACK
NORMAL
Graubele
S
A
+100%
+100%
+100%
+100%
BA
B
Touch
The color of the value fi eld switches from red to blue:
RUDD
INC
RES
DEC
ELEV
BACK
NORMAL
Graubele
S
A
+100%
+100%
+100%
+100%
BA
B
In the active (blue) value fi eld, press INC to increase
the current value DEC to reduce it, for example:
RUDD
INC
RES
DEC
ELEV
BACK
NORMAL
Graubele
S
A
+075%
+100%
+100%
+100%
BA
B
Use the same procedure with the values in the other
value fi elds.
Touch the RES button to reset a changed value in the
blue (and hence active) fi eld to the default.
Note:
Remember that the mixing travel of the mixers
is cumulative with simultaneous control stick
movement, and one servo or both servos may
mechanically collide. To prevent this, reduce the set
mixing values if necessary.
After you have fi nished making your settings, touch
the BACK button at the top left of the display to return
to the menu selection:
BACK
SYSTEM
BASE
FUNCTION
Q.Link
Wing MIX
D/R,EXP
THR.CRV
Flap MIX
Aile diff
Flap sett
Prog.MIX
V-Tail
Trainer
Telemetry
Butterfly
166
Airplane model function menu - V-Tail
S1006_mz-24.3.en.indd 166 17.12.2014 15:22:31