User manual

LANDING
Graubele
RES
000%
000%
RATE
BACK
S
INC
DEC
AILE1 AILE2
ON
ACT CTL
NEXT
SW8
In the active (blue) value fi eld, press INC to increase
the current value within a range of ±150% and DEC to
reduce it, for example:
LANDING
Graubele
RES
+023%
000%
RATE
BACK
S
INC
DEC
AILE1 AILE2
ON
ACT CTL
NEXT
SW8
Use the same procedure for the value of the aileron on
the opposite side as well as any inboard ailerons.
Touch the RES button to reset a changed value in the
blue (and hence active) fi eld to the default.
After completing the settings for the ailerons, you
can switch to the page for setting the fl aps by
touching NEXT at the right edge of the display
and enter the desired settings using the procedure
described above, for example:
LANDING
Graubele
RES
–034%
–034%
FLAP3
FLAP4
–045% –045%
RATE
BACK
S
INC
DEC
FLAP1 FLAP2
ON
ACT CTL
NEXT
SW8
To prevent the sudden defl ection of (brake) fl aps
adjusted in this manner when activating the selected
control, touch in the NEXT button at the right of
the display to go to the last display of this option.
Incorporate a delay for the defl ection of the fl aps as
described above, for example:
BACK
LANDING
Graubele
S
RES
1.2s
AIRBRAKE DELAY
INC
DEC
NEXT
Note:
Smoothly retract the fl aps by setting up a
"LANDING" Quick Link in addition to the
"NORMAL" Quick Link in the "Q.Link" menu,
page 132, and incorporate a switching delay. For the
switch, use the same control that (is to be) used to
trigger the braking function.
After you have fi nished making your settings, touch
the BACK button at the top left of the display to return
to the menu selection:
BACK
SYSTEM
BASE
FUNCTION
Q.Link
Wing MIX
D/R,EXP
THR.CRV
Idle LOW
Prog.MIX
Aile diff
Snap roll
Flap sett
Airbrake
Trainer
Telemetry
161
Airplane model function menu - Airbrake
S1006_mz-24.3.en.indd 161 17.12.2014 15:22:27