User manual

Airbrake
Adjusting the braking system of airplanes
Note:
This menu is hidden when you only select
"1AILE" in the "Model Sel" or "Model type"
menu.
In the basic transmitter display, use a fi nger or the
provided stylus to touch the gear icon labelled "F":
000 000
000
000
mz
000%
000%
000
000
BATT TIME 00: 01: 23
Graubele
M 1
0:01:23
NORMAL
000:00.0
000:00.0
4.1V
RX TX
RX 00.0V
Touch
The display switches to the blue function menu. Use
a fi nger or the provided stylus to touch the "Airbrake"
menu item:
BACK
SYSTEM
BASE
FUNCTION
Q.Link
Wing MIX
D/R,EXP
THR.CRV
Idle LOW
Prog.MIX
Aile diff
Snap roll
Flap sett
Airbrake
Trainer
Telemetry
Touch
Depending on the selected number of ailerons and
fl aps, the display shows different views: The top of the
two following fi gures shows the display when setting
the minimum "2AILE" and the bottom fi gure shows the
display when selecting the maximum "… 4FLAP".
NORMAL
Graubele
RES
000%
000%
RATE
BACK
S
INC
DEC
AILE1 AILE2
INH
ACT CTL
NEXT
ON
NORMAL
Graubele
RES
000%
000%
FLAP3
FLAP4
000% 000%
RATE
BACK
S
INC
DEC
FLAP1 FLAP2
INH
ACT CTL
NEXT
ON
Flight-phase-dependent settings
If you have created Quick Links in the submenu
"Q.Link", page 132, and have assigned an appropriate
name, it appears at the top right in green font such
as "NORMAL". Activate the corresponding switches if
desired to switch between Quick Links.
Programming
In the display described below, enter the amount and
direction of the defl ection of your fl aps, and possibly
also the elevator, for braking. In order for these settings
to be effective and retrievable with a switch, for example,
start programming the option fi elds "ACT" and "CTL"
described below:
• Option ACT (active)
Within the value fi eld for this column, specify whether
this function is generally blocked ( INH ) or ON .
Once you set this value fi eld to ON , you can switch
on and off the effect of the selected control element
on the fl ap position for specifi c quick links individually
with a control assigned in the option fi eld "CTL".
• CTL option (control/switch)
In the value fi eld in the CTL column, assign a control
or control switch for a specifi c Quick Link to the mixer
as described in section "Control, switch and control
switch assignment" on page 38, for example in the
Quick Link "LANDING":
LANDING
Graubele
RES
000%
000%
RATE
BACK
S
INC
DEC
AILE1 AILE2
ON
ACT CTL
NEXT
SW8
RATE line
A symmetrical or an asymmetrical effect can be defi ned
for each fl ap pair. In order to be able to defi ne upward
and downward defl ections, the setting range is ±150%.
Switch to the desired Quick Link such as "LANDING",
and touch the value fi eld to be set with a fi nger or the
provided stylus:
LANDING
Graubele
RES
000%
000%
RATE
BACK
S
INC
DEC
AILE1 AILE2
ON
ACT CTL
NEXT
SW8
Touch
The color of the value fi eld switches from red to blue:
160
Airplane model function menu - Airbrake
S1006_mz-24.3.en.indd 160 17.12.2014 15:22:27