User manual

Flap Sett
Adjusting the effect of the fl ap servo
Note:
This menu is hidden when you only select
"1AILE" in the "Model Sel" or "Model type"
menu.
In the basic transmitter display, use a fi nger or the
provided stylus to touch the gear icon labelled "F":
000 000
000
000
mz
000%
000%
000
000
BATT TIME 00: 01: 23
Graubele
M 1
0:01:23
NORMAL
000:00.0
000:00.0
4.1V
RX TX
RX 00.0V
Touch
The display switches to the blue function menu. Use a
fi nger or the provided stylus to touch the "Flap Sett"
menu item:
BACK
SYSTEM
BASE
FUNCTION
Q.Link
Wing MIX
D/R,EXP
THR.CRV
Flap MIX
Aile diff
Flap sett
Prog.MIX
V-Tail
Trainer
Telemetry
Butterfly
Touch
Depending on the selected number of ailerons and
fl aps, the display shows different views: The top of the
two following fi gures shows the display when setting
the minimum "2AILE" and the bottom fi gure shows the
display when selecting the maximum "… 4FLAP".
BACK
NORMAL
Graubele
S
INC
RES
DEC
000%
000%
000%
000%
AILE1 AILE2
INH
ACT CTL
NEXT
ON
RATE A
RATE B
NORMAL
Graubele
RES
000%
000%
000%
000%
FLAP1 FLAP2
FLAP3
FLAP4
000%
000%
000%
000%
RATE A
RATE B
BACK
S
INC
DEC
INHACT CTL
NEXT
ON
Flight-phase-dependent settings
If you have created Quick Links in the submenu
"Q.Link", page 132, and have assigned an appropriate
name, it appears at the top right in green font such
as "NORMAL". Activate the corresponding switches if
desired to switch between Quick Links.
Programming
In the submenu "CH SET", page 92, let us say you
have assigned a control or switch to input 6 (identifi ed
as "FLAP" or "FLAP1"depending on the selected
number of fl aps), for example, with a model having two
aileron servos and two fl ap servos:
BACK
Graubele
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
ST 1
ST 2
ST 3
ST 4
NONE
SL 1
NONE
NONE
NONE
NONE
NONE
NONE
SERVO
Throttle
Aileron 1
Elevator
Rudder
Aileron 2
Flaps 1
Flaps 2
Aux 1
Aux 2
Aux 3
Aux 4
Aux 5
T:CO
• Option ACT (active/blocked)
If the value fi eld to the right of "ACT" is set to INH
or OFF …
BACK
NORMAL
Graubele
S
INC
RES
DEC
000%
000%
000%
000%
AILE1 AILE2
INH
ACT CTL
NEXT
ON
RATE A
RATE B
… the control element assigned to input 6 in the sub-
menu "CH set" affects servos 6 and 7. In a mod-
el with only one fl ap servo, the control element only
acts on servo 6 exclusively with the values set in the
submenu "D/R,EXP" of the function menu.
If this value fi eld is set to ON …
BACK
NORMAL
Graubele
S
INC
RES
DEC
000%
000%
000%
000%
AILE1 AILE2
ON
ACT CTL
NEXT
ON
RATE A
RATE B
156
Airplane model function menu - Flap Sett
S1006_mz-24.3.en.indd 156 17.12.2014 15:22:25