User manual

NORMAL
Graubele
RES
+100%
+100%
+100%
+100%
FLAP2
000%
000%
OFFSET
FLAP3
FLAP4
000%
000%
000%
000%
000% 000%
RATE A
RATE B
BACK
S
INC
DEC
FLAP1
Touch
The color of the field switches from red to blue:
NORMAL
Graubele
RES
+100%
+100%
+100%
+100%
FLAP2
000%
000%
OFFSET
FLAP3
FLAP4
000%
000%
000%
000%
000% 000%
RATE A
RATE B
BACK
S
INC
DEC
FLAP1
Then, in the active (blue) value field, press INC to
increase the current value within a range of ±125%
and DEC to reduce it, for example:
NORMAL
Graubele
RES
+100%
+025%
+100%
+100%
FLAP2
000%
000%
OFFSET
FLAP3
FLAP4
000%
000%
000%
000%
000% 000%
RATE A
RATE B
BACK
S
INC
DEC
FLAP1
Use the same procedure with value for the downward
deflection of the left flap (RATE B) and for the
values of the right flap and for any second flap pair.
Symmetrical and asymmetrical values are possible.
• "Offset" line
In this line, set the Q.Link-specific positions for all
of the flaps in the respective model. This allows you
to set the positions that the individual flaps are to
assume for each Q.Link.
The adjustment range of ±100% allows the flaps to
be moved to the desired position independent of the
rotational direction of the flap servos, for example:
NORMAL
Graubele
RES
+100%
+100%
+100%
+100%
+033%
+033%
OFFSET
+100%
+100%
+100%
+100%
+055% +055%
RATE A
RATE B
FLAP2
FLAP3
FLAP4
BACK
S
INC
DEC
FLAP1
Note:
•
The available setting options depend on
the number of flaps selected in the
"Model Sel" or "Model Type" menu.
• The flap offset value set here is transferred to the
Quick Link trim described in the following section,
"Flap Sett".
Set the Quick Link-specific flap positions of the
aileron in the mz-18 HoTT transmitter in the display
"CH 5-9" or in the mz-24 HoTT transmitter in the
display "CH 5-12" of the respective "D/R,EXP" menu,
starting on page 136, in line "CH5" such as in the
Quick Link "THERMAL":
THERMAL
CH
CH6
CH7
CH8
CH5-12 CTL
000%
000%
INC
RES
DEC
000%
CH5
+020%
000%
000%
000%
000%
CH10
CH11
CH12
CH9
OFFSET OFFSET
BACK
Graubele
S
Note:
In contrast to the above display of the
12-channel mz-24 HoTT transmitter, only
channels 1 … 9 are offered in the display
of the 9-channel mz-18 HoTT transmitter.
Touch the RES button to reset a changed value in the
blue (and hence active) field to the default.
After you have finished making your settings, touch
the BACK button at the top left to return to the mixer
selection:
SET
CTL
ON
ON
BACK
THERMAL
Graubele
S
FLAP-TYPE ACT
ON
FLAP
AILE >> FLAP
ELEV >> FLAP
FLAP >> ELEV
INH
INH
INH
>>
>>
>>
>>
AILE >> FLAP line
In this line, you can set for each Quick Link the amount
of movement of the flap pair "FLAP" (and possibly
"FLAP2") as an aileron when the aileron is actuated.
Normally, the flaps follow the ailerons with less
deflection, that is, the mixed amount is less than 100%.
The setting range of ±125 % makes it possible to
appropriately adapt the direction of deflection to the
ailerons depending on the direction of rotation of the
153
Airplane model function menu - Flap MIX
S1006_mz-24.3.en.indd 153 17.12.2014 15:22:23