User manual

Flap mixer
Adjustment of the fl ap mixer
Note:
This menu is hidden when you only select
"1AILE" or "2AILE" in the "Model Sel" or
"Model type" menu.
In the basic transmitter display, use a fi nger or the
provided stylus to touch the gear icon labelled "F":
000 000
000
000
mz
000%
000%
000
000
BATT TIME 00: 01: 23
Graubele
M 1
0:01:23
NORMAL
000:00.0
000:00.0
4.1V
RX TX
RX 00.0V
Touch
The display switches to the blue function menu. Use
a fi nger or the provided stylus to touch the "Flap MIX"
menu item:
BACK
SYSTEM
BASE
FUNCTION
Q.Link
Wing MIX
D/R,EXP
THR.CRV
Flap MIX
Aile diff
Flap sett
Prog.MIX
V-Tail
Trainer
Telemetry
Butterfly
Touch
• Flight-phase-dependent settings
If you have created Quick Links in the submenu
"Q.Link", page 132, and have assigned an ap-
propriate name, it appears at the top right in green
font such as "NORMAL". Activate the corresponding
switches if desired to switch between Quick Links:
SET
CTL
ON
ON
BACK
NORMAL
Graubele
S
FLAP-TYPE ACT
ON
FLAP
AILE >> FLAP
ELEV >> FLAP
FLAP >> ELEV
INH
INH
INH
>>
>>
>>
>>
• "ACT" column (active)
Within the value fi eld for this column, specify whether
the mixer is generally blocked INH or ON .
Once you set this value fi eld to ON , you can switch
on and off each mixer individually with a control as-
signed in the right column "CTL".
• "SET" column
To switch to the setting menu, touch the correspond-
ing >> button in the "SET" column with a fi nger or
the provided stylus.
• "CTL" column (control/switch)
In the value fi eld in the CTL column, assign a control
or control switch to the mixer as described in section
"Control, switch and control switch assignment" on
page 38.
FLAP line
Depending on the selected number of fl aps, the display
shows one of three views:
BACK
NORMAL
Graubele
S
INC
RES
DEC
+100%
+100%
FLAP
000%
OFFSET
RATE A
RATE B
NORMAL
Graubele
RES
+100%
+100%
+100%
+100%
FLAP2
000%
000%
OFFSET
RATE A
RATE B
BACK
S
INC
DEC
FLAP1
NORMAL
Graubele
RES
+100%
+100%
+100%
+100%
FLAP2
000%
000%
OFFSET
FLAP3
FLAP4
000%
000%
000%
000%
000% 000%
RATE A
RATE B
BACK
S
INC
DEC
FLAP1
• Lines RATE A / B
If you have activated Q.Link trim as described in the
section "Flap Sett", starting on page 156, you can
change the effect in the value fi elds for the two lines.
Touch the corresponding value fi eld with a fi nger or
the provided stylus, for example:
152
Airplane model function menu - Flap MIX
S1006_mz-24.3.en.indd 152 17.12.2014 15:22:22