User manual

Idle LOW
Setting a stable idle
Note:
This menu is hidden depending on the basic
settings of the "Model Sel" or "Model type"
menu.
In the basic transmitter display, use a fi nger or the
provided stylus to touch the gear icon labelled "F":
000 000
000
000
mz
000%
000%
000
000
BATT TIME 00: 01: 23
Graubele
M 1
0:01:23
NORMAL
000:00.0
000:00.0
4.1V
RX TX
RX 00.0V
Touch
The display switches to the blue function menu. Touch
the menu item "Idle LOW" with a fi nger or the provided
stylus:
BACK
SYSTEM
BASE
FUNCTION
Q.Link
Wing MIX
D/R,EXP
THR.CRV
Idle LOW
Prog.MIX
Aile diff
Snap roll
Flap sett
Airbrake
Trainer
Telemetry
Touch
Normally, the idle of a gas motor is set using the digital
trim control for the throttle. This idle position of the
throttle servo (which depends on the position of the trim
control) can be adjusted as necessary to a higher or
lower idle with a switch to a value that can be set in this
menu within a range of ± 20%.
BACK
Graubele
ACT
CTL
SET
DEC

RES
INC
SERVO
000%
ON
INH
Programming
In the "ACT" line, activate or deactivate the "Idle LOW"
option by touching the associated button with a fi nger or
the provided stylus, for example:
BACK
Graubele
ACT
CTL
SET
DEC

RES
INC
SERVO
000%
ON
ON
In the "CTL" line, assign a control for adding or
removing the corrective value to be set in the line "SET"
as described in the section "Control, switch and control
switch assignment" on page 38, such as:
BACK
Graubele
ACT
CTL
SET
DEC

RES
INC
SERVO
000%
SW3
ON
In the "SET" line, set the desired corrective value by
touching the associated value fi eld with a fi nger or the
associated stylus:
BACK
Graubele
ACT
CTL
SET
DEC

RES
INC
SERVO
000%
SW3
ON
Touch
The color of the fi eld switches from red to blue:
BACK
Graubele
ACT
CTL
SET
DEC

RES
INC
SERVO
000%
SW3
ON
Set the desired value with the INC or DEC button at
the right edge.
The adjustment range is ±100%. A value of
+100% moves the idle position of the throttle
servo set with the throttle trim 20% toward Idle
LOW, and vice versa.
Touch the RES button to reset a changed value in the
blue (and hence active) fi eld to the default.
After you have fi nished making your settings, touch
the BACK button at the top left of the display to return
to the menu selection.
148
Airplane model function menu - Idle LOW
S1006_mz-24.3.en.indd 148 17.12.2014 15:22:19