User manual

NORMAL
Graubele
A
B
+050%
+050%
RES
BACK
S
RUDD >> AILE
(RATE)
INC
DEC
Touch the RES button to reset a changed value in the
blue (and hence active) field to the default.
Note:
To graphically display the current servo
positions, you can access them from nearly
every menu with the button labelled SERVO
or S in the top right of the display with a finger or the
provided stylus. Touch the BACK button to return to
your starting point.
Touch the BACK button at the top left of the display …
NORMAL
Graubele
A
B
+050%
+050%
RES
BACK
S
RUDD >> AILE
(RATE)
INC
DEC
Touch
… to return to the mixer selection:
MIX.TYPE
RUDD >> AILE
AILE >> RUDD
RUDD >> ELEV
INH
INH
INH
>>
>>
ON
ON
ON
>>
ACT CTLSET
BACK
NORMAL
Graubele
S
AILE >> RUDD line (aileron >> rudder)
The rudder also moves to an adjustable degree when
the aileron is actuated. This can compensate for the
negative torque in conjunction with aileron differen-
tiation, page 150, which smoothes flight in curves. Of
course, the rudder remain separately controllable.
The setting range of ±150 % makes it possible to appro-
priately adapt the direction of deflection. This mixer can
optionally be switched on and off by one of the controls
which cannot be independently reset, or a control switch
if applicable, so that the model can be controlled exclu-
sively using the aileron or rudder.
Normally, this mixer is adjusted so that the
rudder extends on the side of aileron moving
upward; an adjustment of 50% is generally
appropriate.
The adjustment should normally be only be symmetrical
with the neutral point of the aileron control stick.
To set the mixer, use a finger or the provided stylus to
touch the middle button in the line "AILE >> RUDD":
MIX.TYPE
RUDD >> AILE
AILE >> RUDD
RUDD >> ELEV
ON
INH
INH
>>
>>
SW6
ON
ON
>>
ACT CTLSET
BACK
NORMAL
Graubele
S
Touch
The corresponding setting menu opens:
BACK
NORMAL
Graubele
S
AILE >> RUDD
A
(RATE) B
+100%
+100%
INC
RES
DEC
To enable this, touch the desired value field, such as the
left one, with a finger or the provided stylus:
BACK
NORMAL
Graubele
S
AILE >> RUDD
A
(RATE) B
+100%
+100%
INC
RES
DEC
Touch
The color of the field switches from red to blue:
BACK
NORMAL
Graubele
S
AILE >> RUDD
A
(RATE) B
+100%
+100%
INC
RES
DEC
Set the desired value with the INC or DEC button at
the right edge.
Use the same procedure for a value on the plus side of
the control travel, for example:
141
Airplane model function menu - Wing Mix
S1006_mz-24.3.en.indd 141 17.12.2014 15:22:15