User manual

Q.Link
Setting up Quick Links
In the basic transmitter display, use a fi nger or the
provided stylus to touch the gear icon labelled "F":
000 000
000
000
mz
000%
000%
000
000
BATT TIME 00: 01: 23
Graubele
M 1
0:01:23
NORMAL
000:00.0
000:00.0
4.1V
RX TX
RX 00.0V
Touch
The display switches to the blue function menu. Touch
the menu item "Q.Link" with a fi nger or the provided
stylus:
BACK
SYSTEM
BASE
FUNCTION
Q.Link
Wing MIX
D/R,EXP
THR.CRV
Flap MIX
Aile diff
Flap sett
Prog.MIX
V-Tail
Trainer
Telemetry
Butterfly
Touch
Within a model memory, the mz-18 HoTT and mz-24
HoTT transmitters make it possible to program up to
six different settings for different fl ight states, normally
termed Quick Links, in the corresponding menus.
Setting up Quick Links
Setting up Quick Links for fi xed-wing models starts in
this menu item by assigning the individual links a name
and a time for smoothly switching to the respective link.
The assignment sequence of links 1 to a maximum of
6 is irrelevant and can have gaps. Nevertheless, always
start with "Q.LINK1" as the "NORMAL" link which is
always active when …
• no Quick Link switch is set, or
• no Quick Link has been assigned to a specifi c switch
combination.
Assigning or leaving the Q.Link name "NORMAL" for
"Q.Link1" could therefore be recommendable. The
names themselves do not have any technical relevance
to the program and only serve to visually identify the
Q.Link that has been switched on and are therefore
displayed in all Q.Link-dependent menus as well as the
transmitter's main display.
• "Q.Link" column
To set up the fi rst real Q.Link, touch the desired
value fi eld in the "Q.LINK" column such as "Q.LINK1"
with a fi nger or the provided stylus:
BACK
1.
2.
3.
4.
5.
NORMAL
CPY
DEL
DEC
0.0s
NAM
Graubele
NEXT
NEW
INC
Q.LINK 1
Q.LINK 2
Q.LINK 3
Q.LINK 4
Q.LINK
SLOW
CTRL
Touch
The color of the fi eld switches from red to blue:
BACK
1.
2.
3.
4.
5.
NORMAL
CPY
DEL
DEC
0.0s
NAM
Graubele
NEXT
NEW
INC
Q.LINK 1
Q.LINK 2
Q.LINK 3
Q.LINK 4
Q.LINK
SLOW
CTRL
Note:
In order to set Q.LINK6, touch NEXT
[next page] at the top right of the display.
• NEW button
Activate the selected Q.Link by touching the NEW
button with a fi nger in the provided stylus:
BACK
1.
2.
3.
4.
5.
NORMAL
CPY
DEL
DEC
0.0s
NAM
Graubele
NEXT
NEW
INC
Q.LINK 1
Q.LINK 2
Q.LINK 3
Q.LINK 4
Q.LINK
SLOW
CTRL
Touch
At the same time, additional value fi elds appear in
the "DELAY" and "CTRL" columns:
BACK
1.
2.
3.
4.
5.
NORMAL
CPY
DEL
DEC
0.0s
NAM
Graubele
NEXT
NEW
INC
Q.LINK 1
Q.LINK 2
Q.LINK 3
Q.LINK 4
Q.LINK
SLOW
CTRL
0.0s
NULL
• NAM button (name)
You can describe or change to the existing Q.Link
name by touching the NAM [Name] button at the
right of the display with your fi nger or provided
stylus as described in detail in the section "Model
name", starting on page 45, such as to the name
"START":
132
Airplane model function menu - Q.Link
S1006_mz-24.3.en.indd 132 17.12.2014 15:22:09