User manual

Setting linear mixers 1 … 5
To set one of linear mixers 1 … 5, use a finger or the
provided stylus to touch the button in the "SET" column
in the line of the mixer to be set, for example,
BACK
NORMAL
Graubele
S
2.
3.
4.
ON
INH
NEXT
ON
1.
ON
CH6
NONE
CH3
CH1
CH3
NONE
CH8
CH3
>>
>>
>>
>>
ACT
S LVMST
SET
5.
INH
NONE
NONE
>>
>>
>>
>>
Touch
The settings page for the selected mixer appears in the
display:
BACK
CH1
A
OFFSET X
CTL
ON
000%
000%
INC
RES
DEC
NORMAL
000%
000%
Graubele
S
CH3
>>
ACT
ON
B
OFFSET Y
The vertical green line represents the present position
of the control at input 1.
The horizontal line (left half red and right half blue)
indicates the mixing level that is consistently zero at
present over the entire control travel. The elevator will
accordingly not respond to the actuation of the CH1
transmitter.
First, define the …
Mixing levels
… above and below the mixer neutral point proceeding
from its momentary position.
To set the mixing level under the neutral point, touch the
value field on the right next to "A" with a finger or the
provided stylus:
BACK
CH1
A
OFFSET X
CTL
ON
000%
000%
INC
RES
DEC
NORMAL
000%
000%
Graubele
S
CH3
>>
ACT
ON
B
OFFSET Y
Touch
The color of the field switches from red to blue:
BACK
CH1
A
OFFSET X
CTL
ON
000%
000%
INC
RES
DEC
NORMAL
000%
000%
Graubele
S
CH3
>>
ACT
ON
B
OFFSET Y
Set the desired value with the INC or DEC button at
the right edge.
The adjustment range is ±125%.
Use the same procedure for a value above the neutral
point.
Symmetrical and asymmetrical values can be set, for
example:
A
OFFSET X
000%
RES
NORMAL
000%
Graubele
>>
B
OFFSET Y
+125%
+050%
BACK
CH1
CTL
ON
INC
DEC
S
CH3
ACT
ON
Touch the RES button to reset a changed value in the
blue (and hence active) field to the default.
Offset (mixer neutral point)
By default, the mixer neutral point (offset) (the point
along the control travel at which the mixer does not
influence the control channel connected to an output) is
precisely in the middle of the control range.
• Offset X
A value unequal to "000%" entered in the "Offset
X" line causes the offset to shift horizontally by a
maximum of ±100%.
To move the offset point 30% to the right (for
example), use a finger or the provided stylus to touch
the value field to the right of "OFFSET X":
A
OFFSET X
000%
RES
NORMAL
000%
Graubele
>>
B
OFFSET Y
+125%
+050%
BACK
CH1
CTL
ON
INC
DEC
S
CH3
ACT
ON
Touch
The color of the field switches from red to blue:
103
Function menu - Prog.MIX
S1006_mz-24.3.en.indd 103 17.12.2014 15:21:55