Instructions for use

19 / 116

S1002.PRO_mz12PRO_Teil2_V1sh

Land and water models

Motor servo or ESC

(forward/backward)

free or special function

steering (left/right)

free or special function

receiver power supply

Copter

Motor/Pitch (climb/sink)

free or special function

Yaw

Roll

Nick

free or special function

receiver power supply

Note

Completely independent from the "classic" receiver configuration

shown here, the connection notes in the installation instructions for

the RC components involved must always be observed. Modern fly-

ght control of copters, for example, often now have a sum signal

input for PPM (SUMO for Graupner HoTT receivers) or SUMD (dig-

ital sum signal), so that a single connection cable is sufficient to

establish a connection. However, the desired sum signal must be

selected in the receiver as described at the end of the "Setting &

data view" section of the "Telemetry" menu.