Instructions for use

113 / 116
S1002.PRO_mz12PRO_Teil2_V1sh
7. Select "Load automatically" or "Open file".
8. Select the "mz-12_...bin" file.
The data transfer to the transmitter begins.
9. The end of the data transfer will be indicated by the update pro-
gram. The transmitter indicates the end of the transfer though
the power on melody.
10. Switch off the transmitter and interrupt the USB connection to
the PC.
11. After each update, check if the model functions are correct.
Restoring the transmitter software
If a firmware update for the transmitter is unsuccessful or the trans-
mitter program freezes and the transmitter cannot be turned off
using the "POWER" switch, then remove the transmitter's battery
after setting the switch to "POWER = OFF" position, or pull the plug
from the transmitter battery. While making sure that the POWER
switch is in the "OFF" position, wait a few seconds and then recon-
nect the disconnected battery.
In this case as well, download a current software package, as
described at the beginning of this section, from the Internet and
unzip it in your computer or, if you have already done this, start the
"Firmware_Update_gr_Studio" and follow the information in the
section "Restoration" in the instructions provided in the software
package.