Instructions for use

101 / 116
S1002.PRO_mz12PRO_Teil2_V1sh
* Detailed explanations of the terms in the "Value" column can be found in the further section "RX DATA
VIEW".
To find out more about the modules described below, go to
www.graupner.de at the respective product.
RECEIVER
This display offers a graph of the data from the display "RX DATA-
VIEW“ of the "Telemetry" menu "SETTINGS, DISPLAYS, .
It have the following meanings:
Value* Description
RX-S QUA Quality expressed as a percentage of the signal
packages from the transmitter arriving at the
receiver
RX-S ST Signal strength expressed in percentage of the
signal from the transmitter arriving at the receiver
RX-dBm Level in dBm expressed as the percentage of
the transmitter signal arriving at the receiver
TX-dBm Level in dBm expressed as the percentage of the
receiver signal arriving at the transmitter
V PACK Shows the longest time in ms in which the data
packets are lost during a transmission from the
transmitter to receiver
RX-VOLT Current operating voltage of the receiver power
supply in Volts
M-RX V Lowest operating voltage of the receiver power
supply since the last startup in Volts
TMP The thermometer visualizes the current operating
temperature of the receiver
RX–S QUA: 100%
RX–S ST : 100%
TX–dBm: –33dBm
RX–dBm: –33dBm
RX–SPG.:4.8V TMP
V–PACK: 10ms
CH OUTPUT TYPE:ONCE
M–RX V :4.6V +22°C