User manual

- ALARM VOLT : Low voltage warning
If receiver voltage is out of the preset voltage, transmitter repeats a beep warning.
Press DOWN buttons to access to ALARM VOLT and press ENT button then the default value
3.8V is highlighted. Press UP/DOWN buttons to set the desired value and press ENT button to
remove the highlight.
- ALARM TEMP + / - : Temperature warning
If receiver temperature is out of the preset temperature, transmitter repeats a beep warning.
Press DOWN buttons to access to ALARM TEMP and press ENT button then the default value is
highlighted. Press UP/DOWN buttons to set the desired value and press ENT button to remove
the highlight.
65
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
ENT
ESC
TEL VIW
press
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
ENT
ESC
TEL VIW
press
ENT
ESC
TEL VIW
press
ENT
ESC
TEL VIW
press
press
press