User manual

16-5. RX CURVE
Perform the exponential programming setup at RX CURVE mode. You may program the
exponential value of channel 2,3,4. The default setup is B curve that leads Servo responds
proportionally depending on transmitter throttle movement. A curve leads that Servo responds
sensitively and C curve leads that Servo responds softly.
Press ENT button to access to highlight the default channel 20 on CURVE 1 CH line then press
UP/DOWN buttons to select the desired channel. The default setup is CH2 AILE, CH3 ELEV,
CH4 RUDD. Press ENT button to remove the highlight and press UP/DOWN button to access
TYPE line. Press ENT button to highlight the default value B then press UP/DOWN buttons to
select one of A, B, C. CURVE2 and 2 can be set in the same method with CURVE1.
63
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
ENT
ESC
TEL VIW
press
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
ENT
ESC
TEL VIW
press
ENT
ESC
TEL VIW
press
ENT
ESC
TEL VIW
press
press
press