User manual

ManualsBrandsGRAUPNER ManualsModel Making Remote ControlsMZ-12 HoTT Handheld RC 2,4 GHz No. of channels: 6 Incl. receiver

- RX WING MIXER TAIL TYPE

This function is used to set the proper tail type. You may select one type of Normal, V-Tail, Elev-

on can be selected depending on the model type. Press DOWN button to access to RX WING

MIXER TAIL TYPE line then press ENT button to highlight the default value NORMAL. Press

UP/DOWN button to select the desired type then press ENT button to remove the highlight.

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

press

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

press

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

press

ENT

ESC

TEL VIW

press

- S-TRAVEL + / -

The maximum servo travel that is connected to slave channel can be programmed.

Press DOWN button to access to S- TRAVEL+/- line then press ENT button to highlight the

default value 00. Press UP/DOWN button to select the desired channel then press ENT button to

remove the highlight.

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

press