User manual

13. Trainer (Aircraft and Helicopter)

The mz-12 has the trainer function. The function activates when you select Teacher, Pupil and

Normal mode. You may use this function by wireless and wired.

- The teacher mode programming setup

Press the direction button to highlight the teach pupil then press the ENT button to access the func-

tion. The black dot is on the NO.1 channel indicating NO.1 channel is selected and the T (Teacher/

the default mode) is assigned. Press the direction button to select the channel and press the ENT

button to select the T (Teacher) or –P (Pupil). After completing to select the desired mode in all

channels, press the direction button to select the hyphen. Press the ENT button then the popup

message “push desired switch into position on” appears. Move the switch that you wish to use as

the RF switch then the corresponding value appears (The trainer function is on/off when that switch

is moved). Press the direction button to select the n/a in the BIND. The transmitter gets ready to

bind to the pupil transmitter now.

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

press

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

press