User manual

ManualsBrandsGRAUPNER ManualsModel Making Remote ControlsMZ-12 HoTT Handheld RC 2,4 GHz No. of channels: 6 Incl. receiver

- Diff-red

Press the direction button to access the diff-red mixing then press the ENT button to highlight the

value. Press the direction button to adjust the desired value then press the ESC button to remove

the highlight.

8. heli mix (Helicopter)

The mz-12 offers the mixing function in Helicopter model type. Heli mix is connected to 2 quick link

function and the mixes are assigned to each quick link function.

•

Ptch : The ptch mixing allows to adjust 5 points of the pitch curve that corresponds to the throttle

stick to maintain the best ight condition. You can program the different pitch curve for each quick link.

•

Pitc-thro : pitc -> thro function allows to adjust 5 points of the throttle curve that corresponds to the

pitch angle for the throttle stick operation so that the engine or motor leads the best ight condition. You

can program the different throttle curve for each quick link.

•

Pitc-rudd : It is pitch rudder mixing. This function is used for offsetting the counter torque that is

generated by the pitch of the main rotor or the change of the motor/engine RPM in accordance with the

movement of the throttle stick. You can set the point at the position where the counter torque is gen-

erated to program the rudder value. This mixing might not be necessary when the high performance

Gyro (Tail lock) or might be need to adjust the small value. You can adjust the different value for each

quick link.

•

Rudd-thro : This function is used to offset to fall down Helicopter engine RPM by the load that is

generated for rudd operation during Helicopter hovering. It can be offset with throttle channel.

•

Aile-thro : This function is used to offset to fall down Helicopter engine RPM by the load that is

generated for aile operation during Helicopter hovering. It can be offset with throttle channel.

•

Elev-thro : This function is used to offset to fall down Helicopter engine RPM by the load that is

generated for elec operation during Helicopter hovering. It can be offset with throttle channel.

•

Gyro : The gyro mixing allows to adjust the gyro gain. You can adjust the different gyro gain for

each quick link.

•

Swash lim : If the aileron and elevator related with the swashplate is simultaneously controlled, the

linkage connected to the servo might be damaged. The swash lim mixing allows to restrict the travel

range of the swash plate to prevent the damage of the linkage. It is typically used for 3D Helicopter.

•

Governor 8ch : This function is used to set governor ON/OFF

•

Governor rate : This function is used to set the value of governor operation.

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

press