User manual

3. Servo sett (Aircraft and Helicopter)
- Rev : used to reverse the servo direction for all channels.
- Cent : used to set the neutral position of the servo.
- Trv : used to increase or decrease the moving angle of the servo travel.
22
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
The servo sett adjusts the servo reverse, center, travel for all six channels.
- Rev (Reverse)
Press the direction button to highlight the servo sett then press the ENT button to access the
function. The cursor is at the rev value, the arrow mark, in the S1 line then press the ENT button to
highlight the arrow mark. Press the direction button then the arrow mark is reversed and the direc-
tion of the servo in S1 (throttle channel) is reversed. Press the ENT button to remove the highlight.
The S2~S6 channels can be program in the same method with the S1.
- Cent (Center)
Press the direction button to select the cent value in the S1 line then press the ENT button to
highlight the value. Press the direction button to adjust the desired center value. Check the neutral
position of the model with adjusting the center value of the S1. Press the ENT button to remove the
highlight. The S2~S6 channels can be program in the same method with the S1.
- Trv (Travel)
Press the direction button to select the trv value of the S1 line then press the ENT button to high-
light the value. Press the direction button to adjust the desired value then press the ESC button
to remove the highlight. Move the stick to select the other trv value then press the ENT button to
highlight. Press the direction button to select desired value. Press the ENT button to remove the
highlight and press ESC button get back to the menu screen. The S2~S6 channels can be program
in the same method with the S1.
press
press
press
press
press