User manual

ManualsBrandsGRAUPNER ManualsModel Making Remote ControlsMZ-12 HoTT Handheld RC 2,4 GHz No. of channels: 6 Incl. receiver

- Quick link sett

The quick link sett function allows to adjust the quick2 value and assign the corresponding switch to

cope with the unexpected situation such as the ight with the strong wind. Since the adjusted value

is activated by moving the switch, you can cope with the crisis with just one switch. It makes you op-

erating the ight much easier. You can select hover, acro, acro 3D, speed and test at the quick2 line

Press the direction button to select the quick link sett line then press the ENT button to access the

function. The cursor is on the default value, hover, in the quick 2 line then press the ENT button to

highlight. Press the direction button to select the desired value then press the ENT button to remove

the highlight. Press the direction button to select the hyphen then press the ENT button. The popup

message “push desired switch into position ON” appears. Move the switch to the desired position

then the corresponding value appears. Press the ESC button to get back to the m.type + quick

screen. The quick link function is connected to the D/R expo and the heli mix functions so the differ-

ent value of the normal and quick2 can be programmed to the D/R expo and the heli mix functions.

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

press

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

press