User manual

- Swash plate
With the transmitter on and the home screen displayed, press the ENT button. The transmitter
menu is displayed. Press the direction button to move the highlight to the m.type quick then press
the ENT button to access the m.type quick function. The cursor is on the model type line then press
the ENT button to highlight the value. Press the direction button to the desired value in the swash-
plate line then press the ESC button to remove the highlight
18
2-1. Model type (Helicopter) : 5 functions are available
Swashplate
Use the swashplate function to set the swahplate type to match your Helicopter model.
It supports 6 value (1servo, 2 servo,3sv(2rol),3sv(140),3sv(2nic),4sv(90))
Cut off
The cut off function allows to turn off the internal combustion engine or the electric motor.
Rotor direct
Use the rotor direct function to set the rotation direction of the main rotor.
Pitch min
Use the pitch min function to reverse the servo direction in all of pitch, elevator, aileron and throttle
channels, the default value is rear. Available settings are rear and front.
Aurtorotat
You may set the switch to be used as auto rotation. If the switch is on, throttle channel is hold at 90%
position and pitch, elevator and aileron that is connected to throttle channel are normal operated. It is
the same function with throttle hold.
Quick link sett
The quick link sett function allows to adjust the quick2 value and assign the corresponding switch to
cope with the unexpected situation such as the ight with the strong wind. Since the adjusted value is
activated by moving the switch, you can cope with the crisis with just one switch. It makes you operat-
ing the ight much easier. You can select hover, acro, acro 3D, speed and test at the quick2 line.
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
press
press
press
press
press
press
press