User manual

ManualsBrandsGRAUPNER ManualsModel Making Remote ControlsMZ-12 HoTT Handheld RC 2,4 GHz No. of channels: 6 Incl. receiver

- Quick link trim

Use the quick link trim function to program the appropriate trims of the quick 2 and quick 3 in the quick

link. The user can program the trim in advance to cope with the unexpected situation such as the ight

with the strong wind and match the ight situation of the takeoff , thermal and speed of the glider. If the

switch is ON, the corresponding trim is activated so the user do not need to set these trims every time.

Here is an example in case of motor at C1 (no) , tail type (normal) , aile/ap (2aile 2ap) at the model

type Press the ENT button to access the function. The cursor is on the FLA value in the normal line

then press the ENT and the direction buttons to highlight and adjust the desired value. Press ENT

button and direction button to remove the highlight and select the AIL value. The AIL value and ELE

value can be adjusted in the same method with the FLA programming.

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

ENT

ESC

TEL VIW

press

1 time press

NOTICE: The programming value of the quick link trim depends on the motor at C1, Tail type, Aile/ap

press